The ambient temperature on the first print was around 16 C. The enclosure temperature was approximately 40C. Other than that both prints were identical in setup.
I think it is pretty evident which one is which!
Thursday 25 July 2013
Enclosure Vs no enclosure.
I recently did a print for a potential customer on my new UP Plus which doesn't have an enclosure. There is quite a striking difference, which I thought I would show.
The ambient temperature on the first print was around 16 C. The enclosure temperature was approximately 40C. Other than that both prints were identical in setup.
I think it is pretty evident which one is which!
The ambient temperature on the first print was around 16 C. The enclosure temperature was approximately 40C. Other than that both prints were identical in setup.
I think it is pretty evident which one is which!
Subscribe to:
Post Comments (Atom)
Thanks a lot for the comparive trial.
ReplyDeleteSorry but I am not sure to get what is what. The left one ine the UP! Plus ? and the right one the UP mini ? Thanks for your reply
Hi yelken octuri, The part on the left was printed on an UP Plus without an enclosure. The one on the right was printed on the same printer but with an enclosure fitted.
ReplyDelete